Abri/Shelter posters

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Advertising signs

  • Add 5 mm bleed.

  • Keep 10 mm safety margin.

  • Use CMYK as the color mode.

  • Resolution of at least 150 dpi.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • Here you can find the customized submission specifications for contour cutting.

Aluminium Power Banks

  • Submit your file in Vector.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Bleed margin is not needed

  • Safety margin is not needed.

Appointment cards

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Make sure the ink coverage isn't higher than 300%.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Aprons with pocket

  • Fonts should be at least 7pt.

  • Safety margin is not needed.

  • Bleed margin is not needed

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Use CMYK as the color mode.

Back packs

  • Convert fonts to outlines or embed all the fonts.

  • Use the PMS color code(s).

  • Use CMYK as the color mode.

  • Bleed margin is not needed

  • Submit your file in Vector.

  • For preparing your file we recommend to use our template.

  • Check your artwork on overprint.

  • Convert fonts to outlines or embed all the fonts.

Balloons

  • Submit your file in Vector.

  • Convert fonts to outlines or embed all the fonts.

  • Use the PMS color code(s).

  • Bleed margin is not needed

  • Safety margin is not needed.

Banner flags

  • Add 5 mm bleed.

  • Keep 50 mm safety margin.

  • Keep 150 mm safety margin from the top.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Banner flags Screen Printed

  • Add 5 mm bleed.

  • Keep 50 mm safety margin.

  • Keep 150 mm safety margin from the top.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Banners with standard size

  • Add 5 mm bleed.

  • Keep 50 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Banners with wall frames

  • Add 5 mm bleed.

  • Keep 50 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Basic Pens

  • Convert fonts to outlines or embed all the fonts.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Bleed margin is not needed

  • Safety margin is not needed.

  • Fonts should be at least 8pt.

Basic polos

  • Submit your file in Vector.

  • Fonts should be at least 7pt.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Safety margin is not needed.

Basic softshell jackets

  • Use the right colors (PMS or CMYK).

  • Submit your file in Vector.

  • Fonts should be at least 7pt.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Safety margin is not needed.

Basic t-shirts

  • Use the right colors (PMS or CMYK).

  • Submit your file in Vector.

  • Fonts should be at least 7pt.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Safety margin is not needed.

Beach flags

  • For preparing your file we recommend to use our template.

  • Keep 50 mm safety margin from the top and right.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Bean bags

  • Use CMYK as the color mode.

  • Fonts should be at least 7pt.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Safety margin is not needed.

Birth announcement cards

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Keep 4 mm safety margin from the fold.

  • Save the file for folded products as spreads.

  • Make a little folded model (dummy) to check how the pages have to be.

  • Make sure the alignment and the sequence of the sides are recognizable.

Black & White Posters

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Blueback posters

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Boardback envelopes

  • Use CMYK as the color mode.

  • Resolution of at least 300 dpi.

  • Fonts should be at least 6pt.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Keep in mind the safety margins.

Boat flags

  • For preparing your file we recommend to use our template.

  • Keep 15 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Booklets

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Use CMYK as the color mode.

  • Save the file for booklets as one PDF document with single pages.

  • Resolution of at least 300 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Make sure the ink coverage isn't higher than 300%.

  • Fonts should be at least 6pt.

  • Save your files in uneditable, print-ready file formats.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Bookmarks

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Use CMYK as the color mode.

  • Resolution of at least 300 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Bottle collars

  • Add 2 mm bleed.

  • Resolution of at least 300 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Use CMYK as the color mode.

  • Make sure the ink coverage isn't higher than 300%.

  • Check your artwork on overprint.

  • Check your spelling and/ or typographical errors

  • Transparencies with CorelDRAW must be reduced

  • Comments will be deleted and not printed

  • Form field content will be deleted and not printed

Bottle labels - die cut

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

Bottle neck labels

  • Add 2 mm bleed.

  • Resolution of at least 300 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Use CMYK as the color mode.

  • Make sure the ink coverage isn't higher than 300%.

  • Check your artwork on overprint.

  • Check your spelling and/ or typographical errors

  • Transparencies with CorelDRAW must be reduced

  • Comments will be deleted and not printed

  • Form field content will be deleted and not printed

Budget hoodies

  • Use the right colors (PMS or CMYK).

  • Submit your file in Vector.

  • Fonts should be at least 7pt.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Safety margin is not needed.

Budget jumpers

  • Use the right colors (PMS or CMYK).

  • Submit your file in Vector.

  • Fonts should be at least 7pt.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Safety margin is not needed.

Budget pens

  • Convert fonts to outlines or embed all the fonts.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Bleed margin is not needed

  • Safety margin is not needed.

  • Fonts should be at least 8pt.

Budget t-shirts

  • Use the right colors (PMS or CMYK).

  • Submit your file in Vector.

  • Fonts should be at least 7pt.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Safety margin is not needed.

Budget zip up hoodies

  • Use the right colors (PMS or CMYK).

  • Submit your file in Vector.

  • Fonts should be at least 7pt.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Safety margin is not needed.

Business Cards

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Use CMYK as the color mode.

  • Resolution of at least 300 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • Here you can find the customized submission specifications for Spot-UV printing.

  • Here you can find the customized submission specifications for Cold-foil.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Keep 4 mm safety margin from the fold.

Business Cards (PMS)

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Use the PMS color code(s).

  • Resolution of at least 300 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Keep 4 mm safety margin from the fold.

  • Save the file for folded products as spreads.

  • Make a little folded model (dummy) to check how the pages have to be.

  • Make sure the alignment and the sequence of the sides are recognizable.

Calendar cards

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Use CMYK as the color mode.

  • Resolution of at least 300 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Canvas bags

  • Submit your file in Vector.

  • For preparing your file we recommend to use our template.

  • Fonts should be at least 7pt.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Use CMYK as the color mode.

  • Use the PMS color code(s).

Canvas with frames

  • Add 5 mm bleed.

  • Keep 10 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Here you can find the customized submission specifications for contour cutting.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Cardboard signs

  • Add 5 mm bleed.

  • Keep 10 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Here you can find the customized submission specifications for contour cutting.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Change of address cards

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Keep 4 mm safety margin from the fold.

  • Save the file for folded products as spreads.

  • Make a little folded model (dummy) to check how the pages have to be.

  • Make sure the alignment and the sequence of the sides are recognizable.

Christmas cards

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Keep 4 mm safety margin from the fold.

  • Save the file for folded products as spreads.

  • Make a little folded model (dummy) to check how the pages have to be.

Coasters

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Use CMYK as the color mode.

  • Resolution of at least 300 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • Fonts should be at least 10 pt.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Compliment Cards

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Compliment Cards (PMS)

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use the PMS color code(s).

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Compliment Slips

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Construction fence banners

  • Add 5 mm bleed.

  • Keep 50 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

Consumption vouchers

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Correx boards

  • Add 5 mm bleed.

  • Keep 10 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Here you can find the customized submission specifications for contour cutting.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Correx sign

  • Add 5 mm bleed.

  • Keep 10 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Here you can find the customized submission specifications for contour cutting.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

Cotton bags (100gsm)

  • Submit your file in Vector.

  • Use the PMS color code(s).

  • Fonts should be at least 7pt.

  • Safety margin is not needed.

  • Bleed margin is not needed

  • Use CMYK as the color mode.

  • Convert fonts to outlines or embed all the fonts.

Cotton bags (old)

  • Submit your file in Vector.

  • Use the PMS color code(s).

  • Fonts should be at least 7pt.

  • Safety margin is not needed.

  • Bleed margin is not needed

  • Use CMYK as the color mode.

  • Convert fonts to outlines or embed all the fonts.

Cotton bags deluxe

  • Submit your file in Vector.

  • Fonts should be at least 7pt.

  • Safety margin is not needed.

  • Bleed margin is not needed

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 15 pt.

  • Check your artwork on overprint.

  • Use the PMS color code(s).

Cotton bags full colour

  • Submit your file in Vector.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 7pt.

  • Use CMYK as the color mode.

  • Bleed margin is not needed

  • Safety margin is not needed.

Cotton bags premium

  • Submit your file in Vector.

  • Fonts should be at least 7pt.

  • Safety margin is not needed.

  • Bleed margin is not needed

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 15 pt.

  • Check your artwork on overprint.

  • Use the PMS color code(s).

Cotton bags short handles

  • Submit your file in Vector.

  • Convert fonts to outlines or embed all the fonts.

  • Bleed margin is not needed

  • Safety margin is not needed.

  • Fonts should be at least 15 pt.

  • Check your artwork on overprint.

  • Use the PMS color code(s).

Curtains

  • Pay attention! Different bleed.

  • Resolution of at least 150 dpi.

  • Keep 10 mm safety margin.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

Curved Line Stand

  • Add 5 mm bleed.

  • Keep 5 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Curved Popupwall

  • Add 5 mm bleed.

  • Keep 5 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Curved zipper wall

  • Add 5 mm bleed.

  • Keep 5 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Custom sized Banners

  • Add 5 mm bleed.

  • Keep 50 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Deluxe Pens

  • Submit your file in Vector.

  • Convert fonts to outlines or embed all the fonts.

  • Use the PMS color code(s).

  • Use CMYK as the color mode.

  • Bleed margin is not needed

  • Safety margin is not needed.

  • Fonts should be at least 8pt.

Deluxe roller banners

  • Keep 15 mm safety margin from the bottom.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Desk pads

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Use CMYK as the color mode.

  • Resolution of at least 300 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Document bags

  • Submit your file in Vector.

  • For preparing your file we recommend to use our template.

  • Fonts should be at least 7pt.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Use CMYK as the color mode.

  • Use the PMS color code(s).

Document bags (budget)

  • Submit your file in Vector.

  • For preparing your file we recommend to use our template.

  • Fonts should be at least 7pt.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Use CMYK as the color mode.

  • Use the PMS color code(s).

Domed stickers

  • Add 3 mm bleed.

  • White will not be printed.

  • Use CMYK as the color mode.

  • Resolution of at least 300 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Doorhangers

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Use CMYK as the color mode.

  • Resolution of at least 300 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • For preparing your file we recommend to use our template.

  • Check your artwork on overprint.

  • Lines should be at least 0.25 pt.

  • Use the right values for full color black.

  • Fonts should be at least 6pt.

Double roller banners

  • Keep 15 mm safety margin from the bottom.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Drawstring bags

  • Submit your file in Vector.

  • For preparing your file we recommend to use our template.

  • Fonts should be at least 7pt.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Use CMYK as the color mode.

  • Use the PMS color code(s).

Drawstring bags (non-woven)

  • Submit your file in Vector.

  • For preparing your file we recommend to use our template.

  • Fonts should be at least 7pt.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Use CMYK as the color mode.

  • Use the PMS color code(s).

Drawstring bags (polyester)

  • Submit your file in Vector.

  • For preparing your file we recommend to use our template.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Use preferably the PMS color code(s) or else CMYK as the color mode.

  • Fonts should be at least 15 pt.

  • Safety margin is not needed.

Dummy Product - Promotional Gift

  • Submit your file in Vector.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Bleed margin is not needed

  • Safety margin is not needed.

Economy Roller Banners

  • Keep 15 mm safety margin from the bottom.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Envelopes (Pantone Colours)

  • Add 3 mm bleed.

  • Keep 8 mm safety margin from the top.

  • Resolution of at least 300 dpi.

  • Use the PMS color code(s).

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Facade Flags

  • Add 5 mm bleed.

  • Keep 40 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Fence banners

  • Add 5 mm bleed.

  • Keep 50 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Fence banners

  • Add 5 mm bleed.

  • Keep 50 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Flag with custom size

  • Add 5 mm bleed.

  • Keep 40 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Flip flops

  • Use CMYK as the color mode.

  • Fonts should be at least 7pt.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Add 5 mm bleed.

  • Keep 40 mm safety margin.

Fluor labels on roll

  • Add 2 mm bleed.

  • White will not be printed.

  • Submit your file in one color (greyscale).

  • Resolution of at least 300 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Flyers

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Use CMYK as the color mode.

  • Resolution of at least 300 dpi.

  • Fonts should be at least 6pt.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Foamex signs

  • Here you can find the customized submission specifications for contour cutting.

  • Keep 10 mm safety margin.

  • Add 5 mm bleed.

  • Use CMYK as the color mode.

  • Resolution of at least 150 dpi.

Folded Business Cards

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Use CMYK as the color mode.

  • Resolution of at least 300 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • Here you can find the customized submission specifications for Cold-foil.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Keep 4 mm safety margin from the fold.

Folded Postcards

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Keep 4 mm safety margin from the fold.

  • Save the file for folded products as spreads.

  • Make a little folded model (dummy) to check how the pages have to be.

  • Make sure the alignment and the sequence of the sides are recognizable.

Folded business cards

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Use CMYK as the color mode.

  • Resolution of at least 300 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • Here you can find the customized submission specifications for Spot-UV printing.

  • Here you can find the customized submission specifications for Cold-foil.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Keep 4 mm safety margin from the fold.

Folded leaflets

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Keep 4 mm safety margin from the fold.

  • Save the file for folded products as spreads.

  • Make sure the alignment and the sequence of the sides are recognizable.

French fold leaflets

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Keep 4 mm safety margin from the fold.

  • Save the file for folded products as spreads.

  • Make sure the alignment and the sequence of the sides are recognizable.

Full Colour Hand Towels

  • Fonts should be at least 7pt.

  • Safety margin is not needed.

  • Bleed margin is not needed

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Use CMYK as the color mode.

Golf flags

  • For preparing your file we recommend to use our template.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Here you can find the customized submission specifications for contour cutting.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Greeting cards

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Use CMYK as the color mode.

  • Resolution of at least 300 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Keep 4 mm safety margin from the fold.

  • Save the file for folded products as spreads.

  • Make a little folded model (dummy) to check how the pages have to be.

  • Make sure the alignment and the sequence of the sides are recognizable.

Half fold leaflets

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Keep 4 mm safety margin from the fold.

  • Save the file for folded products as spreads.

  • Make sure the alignment and the sequence of the sides are recognizable.

Heart-shaped balloons

  • Submit your file in Vector.

  • Convert fonts to outlines or embed all the fonts.

  • Use the PMS color code(s).

  • Bleed margin is not needed

  • Safety margin is not needed.

Hoodies

  • Use the right colors (PMS or CMYK).

  • Submit your file in Vector.

  • Fonts should be at least 7pt.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Safety margin is not needed.

Jumpers

  • Use the right colors (PMS or CMYK).

  • Submit your file in Vector.

  • Fonts should be at least 7pt.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Safety margin is not needed.

Jute bags

  • Submit your file in Vector.

  • For preparing your file we recommend to use our template.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Use preferably the PMS color code(s) or else CMYK as the color mode.

  • Safety margin is not needed.

  • Fonts should be at least 15 pt.

Jute bags contrast

  • Submit your file in Vector.

  • For preparing your file we recommend to use our template.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Use preferably the PMS color code(s) or else CMYK as the color mode.

  • Safety margin is not needed.

  • Fonts should be at least 15 pt.

Jute shoppers

  • Submit your file in Vector.

  • For preparing your file we recommend to use our template.

  • Fonts should be at least 7pt.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Use CMYK as the color mode.

  • Use the PMS color code(s).

Kraft bags (with rib)

  • Submit your file in Vector.

  • Use the PMS color code(s).

  • For preparing your file we recommend to use our template.

  • Bleed margin is not needed

  • Check your artwork on overprint.

  • Convert fonts to outlines or embed all the fonts.

  • Use preferably the PMS color code(s) or else CMYK as the color mode.

  • Fonts should be at least 15 pt.

Kraft labels on roll

  • Add 2 mm bleed.

  • White will not be printed.

  • Use CMYK as the color mode.

  • Resolution of at least 300 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Kraft paper bags (non rib)

  • Submit your file in Vector.

  • Use the PMS color code(s).

  • For preparing your file we recommend to use our template.

  • Bleed margin is not needed

  • Check your artwork on overprint.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 15 pt.

  • Use the PMS color code(s).

Kraft paper bags full colour

  • For preparing your file we recommend to use our template.

  • Bleed margin is not needed

  • Check your artwork on overprint.

  • Convert fonts to outlines or embed all the fonts.

  • Use CMYK as the color mode.

  • Fonts should be at least 6pt.

L-banners

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Labels on roll

  • Add 2 mm bleed.

  • White will not be printed.

  • Use CMYK as the color mode.

  • Resolution of at least 300 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Laptop bags

  • Submit your file in Vector.

  • Use preferably the PMS color code(s) or else CMYK as the color mode.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 15 pt.

  • Bleed margin is not needed

  • Safety margin is not needed.

  • Check your artwork on overprint.

Laptop shoulder bags

  • Submit your file in Vector.

  • Use preferably the PMS color code(s) or else CMYK as the color mode.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 15 pt.

  • Bleed margin is not needed

  • Safety margin is not needed.

  • Check your artwork on overprint.

Letterheads

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Use CMYK as the color mode.

  • Resolution of at least 300 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Letterheads (PMS)

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Use the PMS color code(s).

  • Resolution of at least 300 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Save your files in uneditable, print-ready file formats.

  • Fonts should be at least 6pt.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Lighters

  • Submit your file in Vector.

  • Convert fonts to outlines or embed all the fonts.

  • Use the PMS color code(s).

  • Fonts should be at least 6pt.

  • Bleed margin is not needed

  • Safety margin is not needed.

Long Handle Cotton Bags

  • Submit your file in Vector.

  • Safety margin is not needed.

  • Bleed margin is not needed

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 15 pt.

  • For preparing your file we recommend to use our template.

  • Check your artwork on overprint.

  • Use the PMS color code(s).

Long sleeve polos

  • Use the right colors (PMS or CMYK).

  • Submit your file in Vector.

  • Fonts should be at least 7pt.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Safety margin is not needed.

Long sleeve t-shirts

  • Use the right colors (PMS or CMYK).

  • Submit your file in Vector.

  • Fonts should be at least 7pt.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Safety margin is not needed.

Loopstitched Brochures

  • Save the file for booklets as one PDF document with single pages.

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Luxury business cards

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Use CMYK as the color mode.

  • Resolution of at least 300 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • Here you can find the customized submission specifications for Cold-foil.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Keep 4 mm safety margin from the fold.

Luxury paper bags

  • Submit your file in Vector.

  • Use the PMS color code(s).

  • For preparing your file we recommend to use our template.

  • Bleed margin is not needed

  • Check your artwork on overprint.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 15 pt.

  • Use the PMS color code(s).

Magazines

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Use CMYK as the color mode.

  • Save the file for booklets as one PDF document with single pages.

  • Resolution of at least 300 dpi.

  • Make sure the ink coverage isn't higher than 300%.

  • Fonts should be at least 6pt.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Magnetic car signs

  • Here you can find the customized submission specifications for contour cutting.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Add 5 mm bleed.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

Menu cards

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Resolution of at least 150 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • Here you can find the customized submission specifications for contour cutting.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Keep 4 mm safety margin from the fold.

  • Save the file for folded products as spreads.

  • Make a little folded model (dummy) to check how the pages have to be.

  • Make sure the alignment and the sequence of the sides are recognizable.

Menucards on forex

  • Add 5 mm bleed.

  • Use CMYK as the color mode.

  • Resolution of at least 150 dpi.

  • Keep 10 mm safety margin.

Metallic balloons

  • Submit your file in Vector.

  • Convert fonts to outlines or embed all the fonts.

  • Use the PMS color code(s).

  • Bleed margin is not needed

  • Safety margin is not needed.

Monster envelopes

  • Use CMYK as the color mode.

  • Resolution of at least 300 dpi.

  • Fonts should be at least 6pt.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Keep in mind the safety margins.

Moon stands

  • Add 5 mm bleed.

  • Keep 5 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Mouse Pads

  • Add 5 mm bleed.

  • Keep 5 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

NCR Pads

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

NCR Sets

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Naples pen

  • Submit your file in Vector.

  • Convert fonts to outlines or embed all the fonts.

  • Use the PMS color code(s).

  • Use CMYK as the color mode.

  • Bleed margin is not needed

  • Safety margin is not needed.

  • Fonts should be at least 8pt.

Neon posters

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Save your files in uneditable, print-ready file formats.

  • Use the right values for full color black.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Newspapers

  • Keep 5 mm safety margin.

  • Make sure the ink coverage isn't higher than 300%.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Non woven conference bags

  • Submit your file in Vector.

  • Use preferably the PMS color code(s) or else CMYK as the color mode.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 15 pt.

  • Bleed margin is not needed

  • Safety margin is not needed.

  • Check your artwork on overprint.

Non woven shopping bags

  • Submit your file in Vector.

  • Use preferably the PMS color code(s) or else CMYK as the color mode.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 15 pt.

  • Bleed margin is not needed

  • Safety margin is not needed.

  • Check your artwork on overprint.

Nonwoven Bags (290x290 mm)

  • Submit your file in Vector.

  • For preparing your file we recommend to use our template.

  • Fonts should be at least 7pt.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Use CMYK as the color mode.

  • Use the PMS color code(s).

Notebooks

  • Submit your file in Vector.

  • Use the PMS color code(s).

  • Resolution of at least 300 dpi.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Notepads

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Add lines

Notepads glued cover

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Office stamps

  • Submit your file in 100% black (no greyscale).

  • Fonts should be at least 7 pt.

  • Resolution of at least 300 dpi.

  • Save your files in uneditable, print-ready file formats.

  • Bleed margin is not needed

  • Safety margin is not needed.

PVC Menu cards

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Resolution of at least 150 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • Here you can find the customized submission specifications for contour cutting.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Keep 4 mm safety margin from the fold.

  • Save the file for folded products as spreads.

  • Make a little folded model (dummy) to check how the pages have to be.

  • Make sure the alignment and the sequence of the sides are recognizable.

PVC Tape

  • Add 3 mm bleed.

  • Submit your file in Vector.

  • Use the PMS color code(s).

PVC labels on roll

  • Add 2 mm bleed.

  • White will not be printed.

  • Use CMYK as the color mode.

  • Resolution of at least 300 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Padded envelopes

  • Use CMYK as the color mode.

  • Resolution of at least 300 dpi.

  • Fonts should be at least 6pt.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Keep in mind the safety margins.

Panels

  • Add 5 mm bleed.

  • Keep 10 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Here you can find the customized submission specifications for contour cutting.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Paper Cups

  • Resolution of at least 300 dpi.

  • Add 3 mm bleed.

  • Use the right values for full color black.

  • Use CMYK as the color mode.

  • For preparing your file we recommend to use our template.

Paper bags

  • For preparing your file we recommend to use our template.

  • Bleed margin is not needed

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Use preferably the PMS color code(s) or else CMYK as the color mode.

  • Submit your file in Vector.

  • Fonts should be at least 15 pt.

Perfect bound Booklets

  • Save the file for booklets as one PDF document with single pages.

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

Photo Quality Posters

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Pillows

  • Use CMYK as the color mode.

  • Fonts should be at least 7pt.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Safety margin is not needed.

Placemats

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Plastic business cards

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Use CMYK as the color mode.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Pocket Size Power Banks

  • Submit your file in Vector.

  • Convert fonts to outlines or embed all the fonts.

  • Use the PMS color code(s).

  • Fonts should be at least 6pt.

  • Bleed margin is not needed

  • Safety margin is not needed.

Polos

  • Use the right colors (PMS or CMYK).

  • Submit your file in Vector.

  • Fonts should be at least 7pt.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Safety margin is not needed.

Pop-up displays

  • Add 5 mm bleed.

  • Keep 5 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Postal packaging

  • Keep 4 mm safety margin.

  • Use CMYK as the color mode.

  • Use the PMS color code(s).

  • Resolution of at least 300 dpi.

  • Fonts should be at least 6pt.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Poster frames

  • No submissionspecs are required.

Poster frames (25mm)

  • No submissionspecs are required.

Poster frames (32mm)

  • No submissionspecs are required.

Posters

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Power bank ultra thin

  • Submit your file in Vector.

  • Convert fonts to outlines or embed all the fonts.

  • Use the PMS color code(s).

  • Fonts should be at least 6pt.

  • Bleed margin is not needed

  • Safety margin is not needed.

Powerbank with device holder

  • Submit your file in Vector.

  • Convert fonts to outlines or embed all the fonts.

  • Use the PMS color code(s).

  • Fonts should be at least 6pt.

  • Bleed margin is not needed

  • Safety margin is not needed.

Premium T-shirts (old)

  • Use the right colors (PMS or CMYK).

  • Submit your file in Vector.

  • Fonts should be at least 7pt.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Safety margin is not needed.

Premium polos

  • Use the right colors (PMS or CMYK).

  • Submit your file in Vector.

  • Fonts should be at least 7pt.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Safety margin is not needed.

Premium roller banners

  • Keep 15 mm safety margin from the bottom.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Premium t-shirts

  • Use the right colors (PMS or CMYK).

  • Submit your file in Vector.

  • Fonts should be at least 7pt.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Safety margin is not needed.

Presentation Folders

  • For preparing your file we recommend to use our template.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Keep 4 mm safety margin from the fold.

  • Save the file for folded products as spreads.

  • Make a little folded model (dummy) to check how the pages have to be.

Presentationstands

  • Add 5 mm bleed.

  • Keep 5 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Printed Water Bottles

  • Resolution of at least 300 dpi.

  • Keep 15 mm safety margin from right.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Bleed margin is not needed

Printed cans energy drink

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Submission covering white

Printed cans sparkling apple juice

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Submission covering white

Reboard signs

  • Add 5 mm bleed.

  • Keep 10 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Here you can find the customized submission specifications for contour cutting.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Reboardstands

  • Add 5 mm bleed.

  • Keep 5 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Ring binders

  • For preparing your file we recommend to use our template.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Check your artwork on overprint.

  • Keep 4 mm safety margin.

  • Add 5 mm bleed.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

Roll fold leaflets

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Keep 4 mm safety margin from the fold.

  • Save the file for folded products as spreads.

  • Make sure the alignment and the sequence of the sides are recognizable.

Roll-up banners

  • Keep 15 mm safety margin from the bottom.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Roller blinds

  • Pay attention! Different bleed.

  • Resolution of at least 150 dpi.

  • Keep 10 mm safety margin.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

Rounded corner business cards

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Use CMYK as the color mode.

  • Resolution of at least 300 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • Here you can find the customized submission specifications for Spot-UV printing.

  • Here you can find the customized submission specifications for Cold-foil.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Keep 4 mm safety margin from the fold.

Same day rolller banners

  • Keep 15 mm safety margin from the bottom.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

School bags

  • Submit your file in Vector.

  • Convert fonts to outlines or embed all the fonts.

  • Bleed margin is not needed

  • Safety margin is not needed.

  • Fonts should be at least 15 pt.

  • Use preferably the PMS color code(s) or else CMYK as the color mode.

  • Check your artwork on overprint.

Shop flags

  • For preparing your file we recommend to use our template.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Here you can find the customized submission specifications for contour cutting.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Shopflags (screenprinted)

  • For preparing your file we recommend to use our template.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Here you can find the customized submission specifications for contour cutting.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Shopping bags

  • Submit your file in Vector.

  • Convert fonts to outlines or embed all the fonts.

  • Use the PMS color code(s).

  • Use CMYK as the color mode.

  • Bleed margin is not needed

  • Safety margin is not needed.

  • Fonts should be at least 7pt.

Silver labels on roll

  • Add 2 mm bleed.

  • White will not be printed.

  • Use CMYK as the color mode.

  • Resolution of at least 300 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Skytubes

  • Keep 20 mm safety margin.

  • Use CMYK as the color mode.

  • Add 25mm bleed

  • For preparing your file we recommend to use our template.

Snake stands

  • Add 5 mm bleed.

  • Keep 5 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Solar power bank

  • Submit your file in Vector.

  • Convert fonts to outlines or embed all the fonts.

  • Use the PMS color code(s).

  • Fonts should be at least 6pt.

  • Bleed margin is not needed

  • Safety margin is not needed.

Spiralbound Menucards

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Use CMYK as the color mode.

  • Save the file for booklets as one PDF document with single pages.

  • Resolution of at least 300 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Make sure the ink coverage isn't higher than 300%.

  • Fonts should be at least 6pt.

  • Save your files in uneditable, print-ready file formats.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Sports softshell jackets

  • Use the right colors (PMS or CMYK).

  • Submit your file in Vector.

  • Fonts should be at least 7pt.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Safety margin is not needed.

Square bags

  • Submit your file in Vector.

  • Convert fonts to outlines or embed all the fonts.

  • Use CMYK as the color mode.

  • Fonts should be at least 12 pt.

  • Bleed margin is not needed

  • Safety margin is not needed.

Square beachflags

  • For preparing your file we recommend to use our template.

  • Keep 50 mm safety margin from the top and right.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Square beachflags (Screen Printed)

  • For preparing your file we recommend to use our template.

  • Keep 50 mm safety margin from the top and right.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Square fabric counter

  • Add 5 mm bleed.

  • Keep 5 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Square parasols

  • Use CMYK as the color mode.

  • Fonts should be at least 7pt.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Safety margin is not needed.

Standard Envelopes

  • Add 3 mm bleed.

  • Keep 8 mm safety margin from the top.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Standard business cards

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Use CMYK as the color mode.

  • Resolution of at least 300 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • Here you can find the customized submission specifications for Spot-UV printing.

  • Here you can find the customized submission specifications for Cold-foil.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Keep 4 mm safety margin from the fold.

Stapled Booklets

  • Save the file for booklets as one PDF document with single pages.

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Use CMYK as the color mode.

  • Resolution of at least 300 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Make sure the ink coverage isn't higher than 300%.

  • Fonts should be at least 6pt.

  • Save your files in uneditable, print-ready file formats.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Stickers

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • White will not be printed.

Stickers (digital)

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • White will not be printed.

Sticky notes

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use the PMS color code(s).

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Sticky posters

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Straight Pop-up walls

  • Add 5 mm bleed.

  • Keep 5 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Straight stretch stand

  • Add 5 mm bleed.

  • Keep 5 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Street Flags

  • Add 5 mm bleed.

  • Keep 40 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

Stretched canvas frames

  • Add 5 mm bleed.

  • Use CMYK as the color mode.

  • Resolution of at least 150 dpi.

  • Save your files in uneditable, print-ready file formats.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Suction Cap Window Flags

  • For preparing your file we recommend to use our template.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Here you can find the customized submission specifications for contour cutting.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Swansea pen

  • Submit your file in Vector.

  • Convert fonts to outlines or embed all the fonts.

  • Use the PMS color code(s).

  • Use CMYK as the color mode.

  • Bleed margin is not needed

  • Safety margin is not needed.

  • Fonts should be at least 8pt.

T-shirts

  • Use the right colors (PMS or CMYK).

  • Submit your file in Vector.

  • Fonts should be at least 7pt.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Safety margin is not needed.

Table cards

  • Use CMYK as the color mode.

  • Make sure the ink coverage isn't higher than 300%.

  • Check your spelling and/ or typographical errors

  • Check your artwork on overprint.

  • Transparencies with CorelDRAW must be reduced

  • Comments will be deleted and not printed

  • Convert fonts to outlines or embed all the fonts.

Textile hanging posters

  • Add 5 mm bleed.

  • Keep 40 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

Tickets

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Positioning your perforation.

  • Positioning your numbering.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • How to submit when I would like to have black light ink?

Transparent labels on roll

  • Add 2 mm bleed.

  • White will not be printed.

  • Use CMYK as the color mode.

  • Resolution of at least 300 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Trespa signs

  • Add 5 mm bleed.

  • Keep 10 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Here you can find the customized submission specifications for contour cutting.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Tri fold leaflet

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Keep 4 mm safety margin from the fold.

  • Save the file for folded products as spreads.

  • Make sure the alignment and the sequence of the sides are recognizable.

Tripticos

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Keep 4 mm safety margin from the fold.

  • Save the file for folded products as spreads.

  • Make sure the alignment and the sequence of the sides are recognizable.

Trucker cap full colour

  • Fonts should be at least 7pt.

  • Safety margin is not needed.

  • Bleed margin is not needed

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Use CMYK as the color mode.

Tube Stands

  • Add 5 mm bleed.

  • Keep 5 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

USB car charger plug

  • Submit your file in Vector.

  • Convert fonts to outlines or embed all the fonts.

  • Use the PMS color code(s).

  • Fonts should be at least 6pt.

  • Bleed margin is not needed

  • Safety margin is not needed.

USB stick easy

  • Submit your file in Vector.

  • Convert fonts to outlines or embed all the fonts.

  • Use the PMS color code(s).

  • Fonts should be at least 6pt.

  • Bleed margin is not needed

  • Safety margin is not needed.

USB sticks

  • Submit your file in Vector.

  • Convert fonts to outlines or embed all the fonts.

  • Use the PMS color code(s).

  • Fonts should be at least 6pt.

  • Bleed margin is not needed

  • Safety margin is not needed.

Umbrellas

  • Submit your file in Vector.

  • Convert fonts to outlines or embed all the fonts.

  • Use the PMS color code(s).

  • Fonts should be at least 6pt.

  • Bleed margin is not needed

  • Safety margin is not needed.

Unfolded Menu cards

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Resolution of at least 150 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • Here you can find the customized submission specifications for contour cutting.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Keep 4 mm safety margin from the fold.

  • Save the file for folded products as spreads.

  • Make a little folded model (dummy) to check how the pages have to be.

  • Make sure the alignment and the sequence of the sides are recognizable.

V boards

  • Add 5 mm bleed.

  • Keep 10 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Here you can find the customized submission specifications for contour cutting.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

V-neck t-shirts

  • Use the right colors (PMS or CMYK).

  • Submit your file in Vector.

  • Fonts should be at least 7pt.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Safety margin is not needed.

Vouchers

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

W-fold leaflets

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Keep 4 mm safety margin from the fold.

  • Save the file for folded products as spreads.

  • Make sure the alignment and the sequence of the sides are recognizable.

Wall calendars

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Keep 8 mm safety margin from the binding edge.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Wallpaper

  • Resolution of at least 150 dpi.

  • Keep 10 mm safety margin.

  • Add 5 mm bleed.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

Water resistant posters

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Waterproof Outdoor Canvases

  • Keep 10 mm safety margin.

  • Add 5 mm bleed.

  • Use CMYK as the color mode.

  • Resolution of at least 150 dpi.

Wedding invitations

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Keep 4 mm safety margin from the fold.

  • Save the file for folded products as spreads.

  • Make a little folded model (dummy) to check how the pages have to be.

  • Make sure the alignment and the sequence of the sides are recognizable.

Whiteboards

  • Add 5 mm bleed.

  • Keep 10 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Window Stickers

  • Add 5 mm bleed.

  • Keep 10 mm safety margin.

  • White will not be printed.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

  • Here you can find the customized submission specifications for contour cutting.

Wine boxes

  • Keep 4 mm safety margin.

  • Use CMYK as the color mode.

  • Use the PMS color code(s).

  • Resolution of at least 300 dpi.

  • Fonts should be at least 6pt.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Wire-o Booklets

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Use CMYK as the color mode.

  • Save the file for booklets as one PDF document with single pages.

  • Resolution of at least 300 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Make sure the ink coverage isn't higher than 300%.

  • Fonts should be at least 6pt.

  • Save your files in uneditable, print-ready file formats.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

Wooden wine boxes

  • Add 5 mm bleed.

  • Keep 10 mm safety margin.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

  • Convert fonts to outlines or embed all the fonts.

Wristbands

  • Submit your file in 100% black (no greyscale).

  • Fonts should be at least 10 pt.

  • Lines should be at least 0.5 pt.

  • Resolution of at least 300 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Save your files in uneditable, print-ready file formats.

  • Bleed margin is not needed

  • Safety margin is not needed.

Writable labels on roll

  • Add 2 mm bleed.

  • White will not be printed.

  • Use CMYK as the color mode.

  • Resolution of at least 300 dpi.

  • Convert fonts to outlines or embed all the fonts.

  • Make sure the ink coverage isn't higher than 300%.

  • Save your files in uneditable, print-ready file formats.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

X-Banners

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

XXL roller banners

  • Keep 15 mm safety margin from the bottom.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Xl canvas

  • Add 5 mm bleed.

  • Keep 50 mm safety margin.

  • Resolution of at least 150 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 12 pt.

  • Check your artwork on overprint.

Z-fold leaflets

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Keep 4 mm safety margin from the fold.

  • Save the file for folded products as spreads.

  • Make sure the alignment and the sequence of the sides are recognizable.

Zip up hoodies

  • Use the right colors (PMS or CMYK).

  • Submit your file in Vector.

  • Fonts should be at least 7pt.

  • Convert fonts to outlines or embed all the fonts.

  • Check your artwork on overprint.

  • Bleed margin is not needed

  • Safety margin is not needed.

invitations

  • Add 3 mm bleed.

  • Keep 4 mm safety margin.

  • Resolution of at least 300 dpi.

  • Use CMYK as the color mode.

  • Save your files in uneditable, print-ready file formats.

  • Convert fonts to outlines or embed all the fonts.

  • Fonts should be at least 6pt.

  • Use the right values for full color black.

  • Make sure the ink coverage isn't higher than 300%.

  • Lines should be at least 0.25 pt.

  • Check your artwork on overprint.

  • Keep 4 mm safety margin from the fold.

  • Save the file for folded products as spreads.

  • Make a little folded model (dummy) to check how the pages have to be.

  • Make sure the alignment and the sequence of the sides are recognizable.

Back to top